NISSAN DIESEL UD CONDOR CPB15 CMF88 CMB88 PE6 EURO FE6 FE6T 20.5ML RH HEAVY DUTY HYDRAULIC POWER STEERING PUMP PUMP (14670-Z5560 / 14670Z5560 / 475-04345 / 47504345)

Overview

The Nissan Diesel UD CPB15 / PE6 Euro / FE6 Hydraulic Power Steering Pump (P/STG Pump Assembly 14670-Z5560 / 475-04345) is a heavy-duty hydraulic steering component engineered for Nissan Diesel (UD) CPB15, Condor (CMF88, CMB88), and commercial transport trucks powered by Nissan PE6 (Euro specification) and FE6 / FE6-T 6.9L 6-cylinder diesel engines (CPB15, CMF88, CMB88, LK, MK, and PK series cargo lorries, wooden body trucks, tippers, dump trucks, and box vans equipped with gear-driven hydraulic power steering systems). Built in the Right-Hand (RH) rotation configuration, this high-capacity hydraulic vane pump delivers a steady, calibrated hydraulic flow rate of 16.0 L/min at up to 130 bar operating pressure directly to the power steering gearbox. Replacing a worn, whining, or leaking power steering pump eliminates heavy or stiff steering, cures steering wheel shuddering at low engine idling RPM, prevents hydraulic oil aeration/cavitation, and restores smooth, effortless steering control under heavy commercial payloads.

Engineered to heavy commercial fleet specifications verified against Malaysian commercial truck supplier standards for dependable workshop replacement, steering overhaul, and preventive chassis maintenance.

Key Dimensions (As Labeled in Product Photos)

• Mounting Configuration: Standard heavy-duty 2-bolt flange mounting (direct engine gear casing mount)

• Drive Mechanism: Precision-machined helical drive gear (Right-Hand / RH rotation)

• Rotation Direction: Right-Hand (RH) rotation

• Operating Specifications: Nominal displacement 20.5 ml/r, Maximum operating pressure 130 bar, Speed range 500–3200 r/min, Controlled flow rate 16.0 L/min

• Hydraulic Ports: Threaded high-pressure discharge port (3/4-16UNF) & 12 mm suction oil feed inlet hole

• Measurement Notice: Key specifications including mounting flange bolt center-to-center pitch, pilot spigot diameter, drive gear outer diameter, tooth count, and hydraulic port dimensions are labeled directly in the product photos.

• Please verify your existing pump rotation (RH), 2-bolt flange pattern, and pipe connections against the measurements shown in our photos before ordering.

Compatible Truck Models & Engine Applications

• NISSAN DIESEL (UD TRUCKS): CPB15 & Condor Commercial Lorries (CPB15, CMF88, CMB88, LK, MK, PK Series Cargo Lorries, Wooden Body Trucks, Tippers, Dump Lorries & Box Vans)

• Engine Application:

  • Nissan Diesel PE6 (Euro specification variants)

  • Nissan Diesel FE6 / FE6-T / FE6-TA (6.9L 6-Cylinder Diesel / Turbo Diesel)

• OEM & Cross-Reference Part Numbers:

  • 14670-Z5560 / 14670Z5560 (Nissan / UD Trucks Genuine OEM)

  • 475-04345 / 47504345 (KYB / Kayaba reference)

  • 14670-Z5572 / 14670-Z5607 / 14670-Z5719 / 46107-Z5560 (Malaysian supplier cross-references)

• (Note: In the Malaysian commercial truck market, CPB15 chassis commonly run FE6/FE6-T engines alongside select PE6 Euro configurations. Please cross-check your original pump sample, 2-bolt flange, and pipe port sizes prior to ordering.)

Why Choose Our Commercial Truck Parts?

• Calibrated High-Pressure Hydraulic Flow (20.5 ml/r, 130 bar): Precision-machined internal rotor and vanes provide continuous, smooth 16.0 L/min hydraulic assistance even at low engine idling speeds, minimizing driver fatigue during tight maneuvers.

• Induction-Hardened RH Drive Gear: High-grade heat-treated gear teeth resist pitting, backlash, and premature wear against the engine timing gear train.

• Integrated Flow Control & Relief Valve: Factory-calibrated internal pressure relief valve ensures stable line pressure while preventing high-pressure line bursts during full steering lock.

• High-Grade Oil Seals: Heat- and oil-resistant internal seals prevent hydraulic steering fluid from leaking into the engine oil crankcase.

• Ready Stock & Fast Shipping: Readily stocked for quick dispatch across Peninsular and East Malaysia.

Need Help Confirming Fitment?

Unsure whether this power steering pump matches your lorry's existing engine setup?

• Check your old pump against the measurements shown in our pictures.

• Or send your Chassis Number (VIN) / Engine Model / Gear Teeth Count / sample photos to our team via WhatsApp for instant confirmation!