NISSAN ATLAS CONDOR YU41 H41 UD TRUCKS CIVILIAN PATROL TD42 4.2L 6-CYLINDER V-BELT SINGLE PULLEY 100BAR HYDRAULIC POWER STEERING PUMP (OE: 49110-41T00 / 49110-41T01 / 49110-11J00 / 49110-11J10 / 4911041T00)

Overview

The Nissan Atlas / Condor YU41 6-Cylinder TD42 Hydraulic Power Steering Pump (P/STG Pump Assembly 49110-41T00 / 49110-41T01 / 49110-11J00) is a commercial-grade hydraulic steering component engineered specifically for Nissan Atlas, Condor, Cabstar, and UD Trucks commercial transport lorries powered by the Nissan TD42 (4.2L) inline-6 diesel engine (Atlas H41, YU41 series 6-cylinder commercial cargo lorries, wooden body trucks, tippers, dump trucks, box vans, and tow trucks equipped with belt-driven hydraulic power steering systems). Built in the heavy-duty bracket mount, single V-belt drive pulley (143 mm diameter) configuration, this precision hydraulic vane pump delivers a steady, calibrated hydraulic flow rate of 7.0–8.5 L/min at up to 100–110 bar operating pressure directly to the steering gearbox. Replacing a worn, whining, stiff, or leaking power steering pump eliminates heavy steering effort, cures steering wheel shuddering and judder at engine idle RPM, prevents hydraulic oil cavitation/aeration, and restores smooth, effortless steering control under heavy commercial payloads.

Engineered to commercial fleet specifications verified against Malaysian commercial lorry standards for dependable workshop replacement, steering overhaul, and preventive fleet maintenance.

Key Dimensions (As Labeled in Product Photos)

• Mounting Configuration: Heavy-duty engine block bracket mount (bracket-mounted assembly for easy belt tensioning and direct bolt-on installation)

• Drive Mechanism: Precision-balanced single-groove V-belt pulley drive (ø143 mm outer diameter)

• Drive Type: Belt driven (Single V-belt pulley off engine crankshaft)

• Operating Specifications: Nominal displacement 9.6–10.5 ml/r, Maximum operating pressure 100–110 bar (10.0–11.0 MPa), Operating speed range 500–6000 r/min, Controlled flow rate 7.0–8.5 L/min

• Hydraulic Ports: Threaded high-pressure discharge port (for banjo bolt or flare fitting) & suction feed inlet tube union with O-ring seal

• Measurement Notice: Key specifications including mounting bracket bolt center-to-center pitch, pulley diameter, belt groove width, pulley offset, and hydraulic port dimensions are labeled directly in the product photos.

• Please verify your existing pump mounting bracket pattern, pulley diameter, and hose connections against the measurements shown in our photos before ordering.

Compatible Truck Models & Engine Applications

• NISSAN & UD COMMERCIAL TRUCKS:

  • Atlas / Condor / Cabstar (YU41, H41 Series 6-Cylinder Commercial Cargo Lorries, Wooden Body Trucks, Tippers & Dump Lorries)

  • UD Trucks Condor 20 / Condor 30 (H41 / YU41 6-Cylinder Chassis)

• NISSAN COMMERCIAL BUSES & UTILITY:

  • Civilian Microbus (W40, RGW40, RAW40 Series 4.2L Diesel)

  • Patrol / Safari (Y60, GQ Series 4.2L Diesel)

• Engine Application:

  • Nissan TD42 / TD42-T (4.2L 6-Cylinder Naturally Aspirated & Turbocharged Inline-6 Diesel)

• OEM & Cross-Reference Part Numbers:

  • 49110-41T00 / 4911041T00 (Nissan Genuine OEM - H41/YU41 Series)

  • 49110-41T01 / 4911041T01

  • 49110-11J00 / 4911011J00

  • 49110-11J10 / 4911011J10

  • 49110-11J11 / 4911011J11

  • 49110-VB200 / 49110VB200

• (Note: In the Malaysian commercial lorry market, "YU41 6CYL" specifically denotes lorries running the 6-cylinder TD42 engine with this V-belt pulley-driven pump. For "YU41 4CYL" lorries running FD42/FD46 4-cylinder engines, they utilize the 21-tooth gear-driven pump [49110-0T002]. Always verify your engine cylinder count [6-Cyl TD42 vs. 4-Cyl FD42] prior to ordering.)

Why Choose Our Commercial Truck Parts?

• Calibrated High-Pressure Hydraulic Flow (100–110 bar): Precision-machined internal rotor and vanes provide continuous, smooth 7.0–8.5 L/min hydraulic assistance even at low engine idling speeds, minimizing driver steering effort.

• Precision-Balanced V-Belt Pulley Assembly: Heavy-duty bearing and precision-aligned pulley withstand continuous belt tension without developing shaft play, bearing whine, or belt slippage.

• Heavy-Duty Cast Housing: Rigid housing ensures structural alignment and eliminates leakage or casing distortion under continuous hydraulic operating pressure.

• Integrated Flow Control & Relief Valve: Factory-calibrated internal pressure relief valve ensures stable line pressure while preventing high-pressure line bursts during full steering lock.

• High-Grade Oil Seals: Heat- and oil-resistant internal seals prevent hydraulic steering fluid leakage and maintain system pressure integrity.

• Ready Stock & Fast Shipping: Readily stocked for quick dispatch across Peninsular and East Malaysia.

Need Help Confirming Fitment?

Unsure whether this power steering pump matches your lorry's existing engine setup?

• Check your old pump against the measurements shown in our pictures.

• Or send your Chassis Number (VIN) / Engine Model (TD42 6-Cyl vs. FD42 4-Cyl) / sample photos to our team via WhatsApp for instant confirmation!